(DISCONTINUED)Honeywell Voyager 1202g WIRELESS Barcode Scanner Configuration Instructions

(DISCONTINUED)Honeywell Voyager 1202g WIRELESS Barcode Scanner Configuration Instructions

Honeywell Voyager 1202g WIRELESS Barcode Scanner Configuration Instructions

Here are the instructions for programming your wireless barcode scanner.  Print out this barcode sheet before proceeding:  http://support.bluecrystalsoftware.com/download/v1202gwireless.pdf


Please note:  You MUST print the barcode sheet as you will be unable to scan the code on the screen. Laser printer is recommended.


Scan the attached barcodes in the following order.  It may be necessary to move the barcode scanner around or pull it away from the paper to get the proper read.  The scanner will beep and flash a green light if successful.


Scan the barcodes in this order:


1st scan:  Remove Suffix

2nd scan:  Add CR Suffix

3rd scan:  Add Tab Suffix


The above 3 scans are the only ones needed.  Disregard any other barcodes on the barcode sheet.


*It is imperative that these are scanned in the above order.  Scanning these out of order could cause the device to program incorrectly.


Once the steps are completed, you can successfully scan barcodes inside of Kennel Connection.  Make sure to select the appropriate barcode scanner options under File, System Options, Local tab.


Wireless barcode scanner


Please note:  If you have your base station plugged into a USB hub, it may or may not work correctly. Most of these devices require a direct USB connection to the computer.


    • Related Articles

    • (DISCONTINUED) Honeywell Voyager MS9520 Wired Barcode Scanner Configuration

      Honeywell Voyager MS-9520 USB Barcode Scanner Configuration Guide (Discontinued Model)   For USB port connections:   Plug the end of the barcode scanner cable into an available USB port on your computer. The barcode scanner should beep to let you ...
    • Barcode Scanner Installation Guide KC7

      Barcode Scanner Installation Guide KC7 You can use the barcode scanner for two purposes:  You can scan retail items onto an invoice instead of searching for the code and you can automatically create appointments and check the pet in/out for the ...
    • (DISCONTINUED) Honeywell Voyager 1200g Programming Guide

      Honeywell Voyager 1200g Programming Guide Important: You may need to print this guide on a laser printer to scan correctly.    Unlike previous models, the new Voyager 1200g comes with most of the required settings already set for Kennel Connection ...
    • Zebra DS2208 Barcode Scanner Setup

      ​ This 2D scanner is designed for all types of retail environments and scans very aggressively at all angles, in all light conditions, and on most forms of media including cell phone screens. This scanner was built with future proofing in mind where ...
    • Barcode scanner is not working for check-ins

      Remedy 1:  Be sure Kennel Connection is set to accept checkins with the scanner.  Click on File, System Options, Local tab. Check each box to set your preferences.  Be sure to hit Apply when done. Remedy 2:  The scanner must be configured properly. ...